Water Analysis Meter

Features:
  • 4 LCD digital with back-lit display
  • Measure process Conductivity, Resistivity, TDS, Temperature
  • 0 ~ 100 automatic/manual temperature compensation
  • Manual or Automatic buffer adjustment
  • Restore factory setting function is available
  • Galvanic separation between inputs and outputs and supply voltage
  • High and low programmable alarm, 250V/10A relay output
  • Adaptation SensorCON0.01CON0.1CON1.0CON10CON30
  • On-Line HELP with Text Error Messages
 
Technical Parameter
Display type: LCD
Measurement Range:  0~ 18MΩ.cm or 0~19.99uS/cm
  0~999.9uS/cm
  0~9999uS/cm
  0~100mS/cm
  0~300mS/cm(Optional)
  0~9999ppm
  0 to 100 °C
Resolution:  0.01 MΩ
  0.01uS/cm to 0.1 mS/cm
  1ppm
  0.1°C
Accuracy:  ±1%F.S
  ± 0.2°C
Temperature:Compensation:  Automatic / manual
Output Relays:  2 programmable
  Control type: On/off
  Relay set point hysteresis:User programmable
Current Output:  Type: Isolated 4 to 20 mA
  Range: Selectable zero, & span
  Accuracy: ±0.02mA
  Maximum load: 750Ω
Power supply:   AC110V~220V±10%   50/60Hz
Weight:  500 grams
Dimensions:  96×96×110mm
Mount type:  Panel
Cut-out size:   92×92mm
Protection Degree:  IP54
Environmental:  Operating ambient temperature: -10 to +55 °C
Requirements:  Relative humidity5% to 95% noncondensing
  Maximum operating altitude: 10,000 feet (3000 m)

Tags



If you have questions or suggestions, please leave us a message,we will reply you as soon as we can!